- Chromic Acid
- Sodium Dichromate
- Potassium Dichromate
- Chromium Oxide Green
- Chrome Tanning Agent
- MNB
- MSB
- chromium nitrate-TDS
- Red Phosphorus
- Chromium Trichloride
- Chromium Formate
- Potassium Pyrophosphate
- NIACIN
- Chromium fluoride
- Chromium acetate
- Zinc chrome yellow
- Chromium phosphate
- Barium Chromate
- chromium sulphate
Chromic Acid
Product Character Chemical formula: CrO3, molecular weight: 99.994. Dark red flakes. Melting point: 197℃ ((starts to decompose). Specific gravity: 2.70 g/cm3. Strong oxidation, deliquesces readily in air, and highly soluble in water. Flammable in friction with organic compounds. Poisonous. Application Widely used in chromium plating, wood preservation, medicine, catalyst, pigment, oxidizing agent, glass coloring and mordant of textile etc. Also used as a material producing oxidative catalyst. Packaging In hermetic steel drums, net weight for each:25kg(φ370×φ330×225mm)、50kg(φ365×435mm)、100kg(φ430×750mm)、200kg(φ450×1000mm)or 250kg(φ560×890mm) Notice 1.Do not store with inflammable substance, reducing agent, organic compounds etc. 2.Avoid moisture, heat and shock during storage and transportation. 3.Also avoid contacting with eyes and skin. 4.Personal protective appliance should be equipped with, such as self-suction respirator, acid-proofing rubber gloves, security coat and boot, chemical-resistant protective glasses. 5.In case of leakage, the polluted area should be quarantined. Entry and exit should be strictly controlled. The leaked material should be gathered, reclaimed or transported and disposed in the waste-disposal station. Use recommendations this product has high content, low impurities and sulfate, routine use of maintenance, such as by 50 kg / barrel chromium anhydride dollars, need to add reagents or analytical pure sulfuric acid 30 ~ 50ml. (This ratio is the amount of chromium added daily maintenance dosage of fluid, the actual test cycle analysis according to the report should also be adjusted). Executive Standard GB/T1610-2009 |